TDA4VM: TDA4 QNX PCIE driver

HONGRUN ZHAO

Intellectual 555 points

Part Number: TDA4VM

hi expert

We get the PCIe driver from QNX, the driver need use new tispl.bin.

how can i get the patch for tispl

over 4 years ago

+1 KB over 4 years ago

TI__Guru** 110271 points

Hi,

The tispl.bin is provided/generated as part of each TI PSDK QNX release. TI is not aware of any modifications to TI PSDK QNX releases that are required for the QNX PCIe driver to function.

Please try using the tispl.bin that comes with the equivalent TI PSDK QNX release that QNX tested their PCIe driver against.

Regards,

+1 KB over 4 years ago in reply to KB

TI__Guru** 110271 points

If testing the PCIe driver using SPL boot mode on Processor SDK 7.3 the below steps can be followed to generate a tispl.bin.

(+) [FAQ] TDA4VM: PSDK QNX : Modifying ARM SCR_EL3 EA Bit - Processors forum - Processors - TI E2E support forums

Regards,