Hi,
We are using TMDXICE110 dev board for Profinet development.
We flashed the board with Profinet Code, In order to test the Protocol, I installed Simatic Step 7 software as mentioned in demo Link - SIMATIC STEP 7 (TIA Portal) V13 TRIAL Download-v13-trial-download)
The Simatic software requires a GSD file to be loaded for PLC configuration.
I use the GSD file from the location - C:\ti\PRU-ICSS-Profinet_Slave_01.00.03.04\examples\profinet_slave\GSD , but it doesn't had any of modules.
Kindly help to generate the GSD file for the Demo application.
Thanks in Advance.
Regards,
Akash Kumar