• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 102 subscribers
  • Views 213 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DM3730: Failed to program the flash

Shine
Genius 13655 points
Part Number: DM3730
Other Parts Discussed in Thread: TPS65930

Hello Champs,

Customer uses own DM3730 board with TPS65930 for power supply. He can use flash tool v1.6 to program the flash before. But recently, he failed to use flash tool v1.5 to programming the flash. He used the same software and hardware without any change. He configured  uart boot mode  (sys_boot5--0=110101）. Below are the error messages.

What may cause the issue?

Thanks.
Rgds

Shine

  • 0
    TI__Guru 72725 points

    Hello Shine,

    Please keep in mind that DM3730 no longer has design support as per the product page. Our apps team no longer has hardware or software expertise on this part.

    If flash tool 1.6 is working, why not keep using v1.6?

    Regards,

    Nick