• State
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 238 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AM6442: Support for Lauterbach debugger

AM6442: Support for Lauterbach debugger

Walter Stoll
Intellectual 490 points
Part Number: AM6442


Could you please tell us the status of thread https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1129649/am6442-support-for-lauterbach-debugger/4203800#4203800

We were promised that the peripheral register files would be delivered to Lauterbach within "a few weeks". Has this been done ?

  • 0
    TI__Genius 9620 points

    Walter,

    Apologies for the delay in this process. The work to enable full chip peripheral files is still ongoing. We have run into challenges converting all peripherals to be enabled for CCS XML format requiring us to debug our generation flow leading to unforeseen delays. We cannot provide this to Lauterbach for conversion until the full process is complete. 

    I am attaching a partial drop of XMLs to be used with CCS for peripheral debug. These have not been converted to the Lauterbach peripheral format yet. However, if you have access to CCS and an XDS debugger hopefully these can help enable you for the time being as we continue to work through resolving our full chip peripheral issues. 

    Thanks,

    Chris AM64x Partial Module xmls.zip