TDA4VM: IMX219 can't show in ls /dev

Shine

Part Number: TDA4VM

Hello Champs,

Customer still had the issue in his previous thread.
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1184191/tda4vm-imx219-can-t-show-in-ls-dev

Since the thread is locked, I recreated this post.

Below is his latest reply.

Customer connected the camera which is the same as you showed in the previous thread.

Thanks
Regards
Shine

over 2 years ago

0 Takuma Fujiwara over 2 years ago

TI__Mastermind 40153 points

Hi Shine,

The connection looks correct. Can you confirm whether the customer is still not able to see the 0x10 address get populated when running i2cdetect -y -r 0x8 and i2cdetect -y -r 0x9?

And can the customer also try only connecting one camera at a time and doing i2cdetect? As these are not USB cameras, I do not expect it to be an issue, but just want to make sure it is not related to the following issue: https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-sk-tda4vm/08_05_00/exports/docs/faq.html#pub-edgeai-multiple-usb-cams

Regards,

Takuma

Processors

Processors forum

TDA4VM: IMX219 can't show in ls /dev