This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
TPS6594133ARWERQ1 and BOOT EEPROM are connected to I2C pins G24, J25 of TDA4AL-Q1,
is it necessary to have EEPROM? If not, please check if there is no problem in booting without connecting anything to G24, J25 of TDA4AL.
The boot EEPROM is NOT required and can be removed from your design. You will need an I2C to connect with the PMIC (TPS6594133A) for communication (AVS Voltage, PMIC interrupts, etc)