AM6548: How to modify BSP file

Michael Ye

Part Number: AM6548

Hi,

We are developing a custom board using the AM6548 processor. What does the process look like when modifying the BSP file to accommodate our hardware?

For example, we would like to remap a signal from an I2C expander to a GPIO pin on the SoC itself.

Thank you,

Michael

2 months ago

0 Nick Saulnier 2 months ago

TI__Guru* 76425 points

Hello Michael,

Please clarify exactly which BSP files you are asking about. e.g., the Linux devicetree files? Something else?

Regards,

Nick

0 Michael Ye 2 months ago in reply to Nick Saulnier

Prodigy 130 points

Hi Nick,

We were wondering about how to modify the BSP files for TI RTOS

Thank you,

Michael

+1 Mukul Bhatnagar 2 months ago in reply to Michael Ye

TI__Guru* 80095 points

We no longer support TI RTOS on these products. If you are using PDK, the softwrae is provided as is. If this is a new development, we strongly recommend evaluating newer devices like AM64 family, that do have a stronger and supported offering on Free RTOS for MCU+ SDK and Linux on A53.

Processors

Processors forum

AM6548: How to modify BSP file