Processors

Processors forum

SK-AM62A-LP: How to generate tiboot3-gpmc.bin, tiboot3-nand_bch.bin, tiboot3-gpmc_bch.bin

JBD_SW_zhulin zhulin

Prodigy 70 points

Part Number: SK-AM62A-LP

Tool/software:

Hi

In the question of how to burn AM62x using GPMC NAND, how do I generate tiboot3-gpmc.bin, tiboot3-nand_bch.bin, tiboot3-gpmc_bch.bin？

0 Hong Guan64 3 months ago

TI__Guru 65175 points

There're two options to flash u-boot binary as listed below.
1/. How to flash and boot u-boot from parallel GPMC NAND on AM62x
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1402705/faq-how-to-flash-and-boot-u-boot-from-parallel-gpmc-nand-on-am62x
2/. How to flash GPMC-NAND with Lauterbach JTAG on AM62x
https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1422565/faq-how-to-flash-gpmc-nand-with-lauterbach-jtag-on-am62x
where the Lauterbach JTAG debugger is needed, and BCH binary needs to be generated with the utility "bin2nand" attached in the FAQ.
Best,
-Hong