Linux/TMDSLCDK138: Porting GTK+3

Hi
Could you please suggest the link of yocto project for TMDSLCDK138 development board.

Regards
Allwyn

Hi Yordan,

I have gone through above link and done the following steps,

1 git clone git://arago-project.org/git/projects/oe-layersetup.git tisdk

2 cd tisdk

3 ./oe-layertool-setup.sh -f configs/processor-sdk/processor-sdk-05.02.00.10-config.txt

4 cd build

5 . conf/setenv

6 downloaded the tool chain from "software-dl.ti.com/.../index_FDS.html"

7 export TOOLCHAIN_PATH_ARMV5=path to toolchain/gcc-linaro-7.2.1-ti2018.00-armv5-x86_64_arm-linux-gnueabi

8 MACHINE=omapl138-lcdk bitbake arago-base-tisdk-image

are the steps correct ?

where can i get the files to create sd-card?

I have searched "arago-tmp-[toolchain]/deploy" . There are 5 .ipk files (example base-files_3.0.14-r89.arago4_omapl138_lcdk.ipk)in this folder


Regards
Allwyn

Hi yordan,

I am using ubuntu 16.04 LTS to build the project mentioned this link " software-dl.ti.com/.../Overview_Building_the_SDK.html " .

My PC gets shutdown after executing bitbake command

Regards,
Allwyn

Hi,

I have done the all the steps in the mentioned link, I exported the same tool chain in the link. When execute bitbake command it shows the following error:

ERROR: Unable to start bitbake server
ERROR: Last 10 lines of server log for this session (/home/axa/Documents/yocto_build_march07/tisdk/build/bitbake-cookerdaemon.log):
File "/home/axa/Documents/yocto_build_march07/tisdk/sources/bitbake/lib/bb/cooker.py", line 197, in __init__
self.initConfigurationData()
File "/home/axa/Documents/yocto_build_march07/tisdk/sources/bitbake/lib/bb/cooker.py", line 356, in initConfigurationData
self.databuilder.parseBaseConfiguration()
File "/home/axa/Documents/yocto_build_march07/tisdk/sources/bitbake/lib/bb/cookerdata.py", line 316, in parseBaseConfiguration
raise bb.BBHandledException
bb.BBHandledException
ERROR: Failed to obtain external Linaro toolchain version: Execution of '/opt/gcc-linaro-7.2.1-ti2018.00-armv5-x86_64_arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc -v' failed: command not found
ERROR: Failed to obtain external Linaro toolchain version: Execution of '/opt/gcc-linaro-7.2.1-ti2018.00-armv5-x86_64_arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc -v' failed: command not found
ERROR: Error: EXTERNAL_TOOLCHAIN path '/opt/gcc-linaro-7.2.1-ti2018.00-armv5-x86_64_arm-linux-gnueabi' does not exist

Regards,
Allwyn

Hi Yordan,
I was able to build the yocto project using this toolchain "gcc-linaro-7.2.1-ti2018.00-armv5-x86_64_arm-linux-gnueabi
".
I put the toolchain in opt path and build and it works for me.
Thanks for your support.

I found the wxwidget recipe file in "tisdk/sources/meta-ros/recipes-extended/wxwidgets " in this path. How can I build yocto project with wxwidgets.?

Regards,
Allwyn