Hello ,
Experiment done to enable CAN messages in PC from board
1. Created MCAN standalone application( took reference from cockpit demos for MCAN code) on R5F core in vision apps.
2. Followed below steps since its building R5F core
4.1.2.10.3.2 SD Card Boot section from below user guide
../../psdk_rtos_auto_j7_06_01_00_15/gateway-demos/index.html
3. Minicom Logs observed as below:-
Welcome to minicom 2.7.1
OPTIONS: I18n
Compiled on Aug 13 2017, 15:25:34.
Port /dev/ttyUSB0, 22:29:52
Press CTRL-A Z for help on special keys
0x410002
0x810004
0x4001000
0x4401380
0x41000B
0x810004
Kindly suggest me how to run MCAN application in the above scenario.
Regards,
Pooja Krishna