DRA71XEVM: Early Capture in DRA71xEVM

Chih-Kuo Hsu

Expert 1885 points

Part Number: DRA71XEVM

Dear Sirs:

We are using PROCESSOR SDK VISION 03_08_00_00.

We are using DRA71xEVM.

We want to use the EARLY capture case in linux.

The early code is in configuration tda2ex_evm_linux_all.

I saw the early code is in rtos early_capture_late_weston and the links in linux and ipc path are created after hlos linux is booted.

Due to our final scenario needs encoding and saving the bitstream in linux. So the final links would be like the below

CAP(IPU)=>DUP(IPU)=>DISPLAY(IPU) DUP(IPU)=>ENCODE(IPU)=>IPC_OUT(IPU)=>IPC_IN(A15)=>NULL(A15)

Is the above situation possible in TI SDK?

Regards,

/ckhsu

over 4 years ago

0 Karthik Ramanan over 4 years ago

TI__Guru** 113810 points

Hi Ckhsu,

Yes, it should be possible. I'm notifying my colleague who can also confirm once again.

Regards

Karthik

0 Gaviraju Doddabettahalli Bettegowda over 4 years ago in reply to Karthik Ramanan

TI__Genius 14305 points

Hi,

It's possible but small changes in the link & chain as below.

CAP(IPU)=>DUP(IPU)=>DISPLAY(IPU) DUP(IPU)=>GATE(IPU)=>ENCODE(IPU)=>IPC_OUT(IPU)=>IPC_IN(A15)=>NULL(A15)

The Gate link is added before encode link, because null link will not work until the Linux file system mount.

When the file system is ready, you can the send the below command to the GATE link to open the gate.

case '1':
/* Send command to toggle operation status */
System_linkControl(
chainsObj.ucObj.Gate_1LinkID,
GATE_LINK_CMD_SET_OPERATION_MODE_ON,
NULL,
0,
TRUE);
break;
case '2':
/* Send command to toggle operation status */
System_linkControl(
chainsObj.ucObj.Gate_1LinkID,
GATE_LINK_CMD_SET_OPERATION_MODE_OFF,
NULL,
0,
TRUE);
break;

You can refer the "/vision_sdk/apps/src/hlos/adas/src/usecases/vip_single_cam_connectorLinksA15_sgx_display" use-case for GATE link usage information .

Thanks

Gaviraju

0 Chih-Kuo Hsu over 4 years ago in reply to Gaviraju Doddabettahalli Bettegowda

Expert 1885 points

Hi Karthik and Gaviraju:

Thank you very much, I will investigate on the code to see how to do it.

Regards,

/ckhsu

Processors

Processors forum

DRA71XEVM: Early Capture in DRA71xEVM