Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: AM625
We are facing problem when connecting a SPI Nor (W25Q128VEIQ) to OSPI CS0.
Basically it is working but from time to time it comes to errors during SF PROBE command in u.boot.
Please find attached the CLK Signal measured during…
Part Number: SK-AM62
I am attempting to boot the AM62x SK EVM from eMMC and OSPI. The board I have is revision PROC114E1.
I am using the TI provided SD-Card image located here: https://dr-download.ti.com/software-development/software-development…
Part Number: AM6412
Hi TI,
I can generate USB compliance test patterns on AM64 SoC by the following command
# devmem2 0x0f410480 w 0xA0 # devmem2 0x0f410080 w 0x4 # devmem2 0x0f410484 w 0x40000000
However, the test pattern stops transferring…
Part Number: AM6412
Hi TI,
How to generate USB compliance test from CPU In Linux kernel 5.10 on AM64xx.
I followed the instructions below.
TDA4VM: USB 2.0 host test mode
Set dr_mode to host.
# cat /proc/device-tree/bus\@f4000/cdns-usb…
Part Number: SK-AM62
Hello.
i am working with linux arago default image for am62 evaluation board. I am trying to understand how reduce boot time, and get command prompt as fast as i can.
Just to have an idea of how to speed up this, i would like…
Part Number: PROCESSOR-SDK-AM64X
If you you are having trouble booting an AM64x or AM243x based board with Processor or MCU+ SDK v8.4, please see the below information.
Overview
With the production release of Silicon Release 2.0 (SR 2.0) of the…
