Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM263P4-Q1: How to run FLS SIP examples in AM263P SIP Device?

    Part Number: AM263P4-Q1 Please provide the steps to run FLS SIP examples on AM263P SIP Device

  • [FAQ] TDA4VH-Q1: How to get Traffic profile for c7x core using cp trace

    Part Number: TDA4VH-Q1 Hi Team, Could you guide me on the steps to get the traffic profile for c7x cores using cp trace?

  • [FAQ] TDA4VH-Q1: How to Pass VLAN 0 Packets Transparently Through CPSW Using the Native Linux Driver

    Part Number: TDA4VH-Q1 By default, CPSW does not pass VID 0 (priority-tagged) frames as-is. The Linux driver strips or replaces VID 0 at both ingress and egress, making it impossible for the use-cases that require VID 0 with priority bits set on the…

  • [FAQ] AM62P: McASP on MCU-R5F Core (mcu-r5fss0-0) — AM62Px MCU+ SDK

    Part Number: AM62P Other Parts Discussed in Thread: SYSCONFIG The AM62P MCU+ SDK only provides McASP examples for the wkup-r5fss0-0 core. How do I port McASP to run on the mcu-r5fss0-0 core with DMA support on the AM62Px platform?

  • [FAQ] AM625: eMMC Boot with only R5 SPL (tiboot3.bin) on boot0 and tispl.bin/u-boot.img on UDA

    Part Number: AM625 Overview This guide documents how to configure AM62X to boot from eMMC when only tiboot3.bin fits on boot0 , and tispl.bin / u-boot.img must be loaded from a FAT32/ext4 filesystem on the UDA. This differs from the standard SDK layout…

  • [FAQ] SYSFW/TIFS Secure Crypto Service Example on AM62x

    Part Number: AM625 - SYSFW/TIFS Crypto Service The crypto services allow SYSFW/TIFS client to encrypt/decrypt data blobs using one of AES-ECB, AES-CBC or AES-GCM operations. - SYSFW/TIFS Crypto Service API https://software-dl.ti.com/tisci/esd/latest…

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62Ax / AM62D-Q1 / AM62Px / AM62L / AM64x / AM243x (ALV, ALX) Custom board hardware design – Generic Guidelines for SOM and Carrier Board Based Designs

    Part Number: AM623 Other Parts Discussed in Thread: AM62P , DP83867-EVM-AM , TMDSHSECDOCK , TDA4AL-Q1 , TDA4VL-Q1 , J721S2XSOMXEVM , TDA4VE-Q1 , J721EXCPXEVM , J721EXENETXPANEVM HI TI experts, Do you have some guidelines when designing customer board…

  • [FAQ] J784S4XEVM: How to boot Keywriter over Ethernet

    Part Number: J784S4XEVM Provide a refrenced steps for booting Keywriter over Ethernet

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62L / AM64x/ AM243x (ALV) / AM62Ax / AM62D-Q1 / AM62Px Design Recommendations / Commonly Observed Errors during Custom board - GPMC memory interface

    Part Number: AM6442 Other Parts Discussed in Thread: TMDS64EVM , , AM5728 , AM67 , PROCESSOR-SDK-AM62X , SYSCONFIG , AM625 , AM62P , AM62L Hi TI Experts, Is there a list of design recommendations or guidelines or E2E references that can be following…

  • [FAQ] J721S2XSOMXEVM: How to update KEYREV using TIFS API on HS-SE device?

    Part Number: J721S2XSOMXEVM How can we update KEYREV using the TISCI_MSG_WRITE_KEYREV API on HS-SE device?

View FAQ threads
  • Threads 203687 Discussions