Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM625: Disturance on OSPI CLK connected to SPI NOR

    Part Number: AM625 We are facing problem when connecting a SPI Nor (W25Q128VEIQ) to OSPI CS0. Basically it is working but from time to time it comes to errors during SF PROBE command in u.boot. Please find attached the CLK Signal measured during…

  • [FAQ] AM62x: How to customize eMMC and OSPI flash layout for SPL/u-boot booting with TI AM62x Linux SDK

    Part Number: SK-AM62 I am attempting to boot the AM62x SK EVM from eMMC and OSPI. The board I have is revision PROC114E1. I am using the TI provided SD-Card image located here: https://dr-download.ti.com/software-development/software-development…

  • [FAQ] AM6412: Passing USB compliance test patterns trhough a USB 2.0 hub

    Part Number: AM6412 Hi TI, I can generate USB compliance test patterns on AM64 SoC by the following command # devmem2 0x0f410480 w 0xA0 # devmem2 0x0f410080 w 0x4 # devmem2 0x0f410484 w 0x40000000 However, the test pattern stops transferring…

  • [FAQ] AM6412: USB compliance test pattern generation

    Part Number: AM6412 Hi TI, How to generate USB compliance test from CPU In Linux kernel 5.10 on AM64xx. I followed the instructions below. TDA4VM: USB 2.0 host test mode Set dr_mode to host. # cat /proc/device-tree/bus\@f4000/cdns-usb…

  • [FAQ] SK-AM62: how to disable the HMI demo

    Part Number: SK-AM62 Hello. i am working with linux arago default image for am62 evaluation board. I am trying to understand how reduce boot time, and get command prompt as fast as i can. Just to have an idea of how to speed up this, i would like…

  • [FAQ] TDA4VM: PDK Interrupt registration for R5F using OSAL

    Part Number: TDA4VM This document is intended to explain the interrupt registration process for R5F cores used in TI PDK

  • [FAQ] PROCESSOR-SDK-AM64X: AM64x/AM243x SR 2.0 Device Type Transition

    Part Number: PROCESSOR-SDK-AM64X If you you are having trouble booting an AM64x or AM243x based board with Processor or MCU+ SDK v8.4, please see the below information. Overview With the production release of Silicon Release 2.0 (SR 2.0) of the…

  • [FAQ] 66AK2H12: How to create "Target configuration" and do "Test connection" on K2H EVM

    Part Number: 66AK2H12 Hi, How to create "Target configuration" and do "Test connection" on K2H EVM ?

  • [FAQ] 66AK2H12: How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2H 6.3 for K2H?

    Part Number: 66AK2H12 Hi, How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2H for K2H?

  • [FAQ] 66AK2E05: How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2E 6.3 for K2E?

    Part Number: 66AK2E05 Hi, How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2E for K2E?

View FAQ threads
  • Threads 197926 Discussions