Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TDA4VM: How to forward Broadcast frames to HLOS (QNX) running on A72 by default ?

    Part Number: TDA4VM How to forward Broadcast Frames to QNX (A72) in case of QNX+RTOS use case with Ethernet Firmware, note all my network operations were managed at QNX.

  • [FAQ] AM625: Generating Sitara AM62x/AM62Ax/AM64x GP Device bootable MMC/SD Card Images using SDK v8.6 and Yocto

    Part Number: AM625 (also applicable to other AM62x, AM62Ax, AM64x, AM65x parts with minor changes) Overview During recent releases of the Processor SDK Linux SDKs v8.x several AM6x devices such as AM62x and AM64x were transitioned from the GP (General…

  • [FAQ] TDA4VM: K3conf: Capabilities with options(help)

    Part Number: TDA4VM The k3conf readme does not give out the details of its usage. Can we have all the options and arguments? A dump of help file.

  • [FAQ] AM6442: AM6442 LVCMOS Buffer Type

    Part Number: AM6442 Hello, In the datasheet of the AM6442 RESETSTATz signal is defined as LVCMOS buffer type. LVCMOS buffer type is described below as a push pull cell with those caracteristics : Could you please for more understanding provide…

  • [FAQ] TDA4VM: How to disable serdes from Linux to enable serdes configuration from Ethfw and Enet lld

    Part Number: TDA4VM Other Parts Discussed in Thread: DRA821 , DRA829 , , TDA4VH I am facing issues in configuring serdes from Ethfw/Enet lld aaplications for serial communication protocols. How can I disable serdes from Linux so that I am not reconfiguring…

  • [FAQ] AM623: VDDSHV5(G17) pin connection

    Part Number: AM623 Hi, If the SD card is not used, is the VDDSHV5 (G17) pin still needed? Can it be leave unconnected?

  • [FAQ] AM625: Linux SDK v08.06: U-Boot: USB DFU boot is broken with "dfu_alt_info_ram env variable not defined!" Error

    Part Number: AM625 Issue Symptoms When trying to boot an AM62x device using the USB DFU boot mode using the U-Boot that is part of the TI Processor SDK Linux v08.06 ( https://www.ti.com/tool/download/PROCESSOR-SDK-LINUX-AM62X/08.06.00.42 ) the following…

  • [FAQ] AM62x: U-Boot Build on SDK v8.06 fails with 'make[1]: arm-linux-androideabi-ld.gold: No such file or directory' error

    Part Number: AM625 Issue Symptoms When building U-Boot for A53 on AM62x using SDK v8.06, the build may break with the following error message: arm-linux-androideabi-ld.gold -r -b binary common/avb_pubkey -o common/avb_pubkey.o make[1]: arm-linux…

  • [FAQ] TDA4VM: Explain why VRING_BASE_ADDRESS = 0xAA000000 and IPC_VRING_BUFFER_SIZE = 0x1C00000U.

    Part Number: TDA4VM Hello, Is the address be fixed to a specific value per SOM? My understanding is that we can define it anywhere, the only constraint is just to make sure it's accessable from all cores, non cachable, and configured the same…

  • [FAQ] AM625: How to boot from R5 U-Boot SPL directly into the Linux Kernel, skipping A53 SPL and A53 U-Boot (Falcon Mode)

    Part Number: AM625 (also applicable to other AM62x, AM62Ax, AM64x, AM65x parts with minor changes) Overview In order to optimize boot time, complexity, and storage space requirements it may be desirable to optimize the usual TI AM6x based boot flow…

View FAQ threads
  • Threads 198462 Discussions