This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TMDSEMU560V2STM-U: Driver for TMDSEMU560V2STM-U

Prodigy 30 points

Replies: 4

Views: 95

Part Number: TMDSEMU560V2STM-U

I have lost of my CDROM for TMDSEMU560V2STM-U. Anyone can share me the link for downloading this software? If yes, can you public your link or send me via email: viet.bui@asic.vn.

Thanks so much.

  • Guru 124360 points
    Blackhawk has their driver software posted here: www.blackhawk-dsp.com/.../downloads

    Note that if you are using Code Composer Studio (CCS) if you select Blackhawk debug probes when you install CCS it will install the drivers for this debug probe.

    Regards,
    John

     


    If my reply answers your question please click the "This resolved my issue" button

  • In reply to JohnS:

    Hi John,

    Thank you for your infor. I access the link you shared and saw that Code Composer Studio v4 thru v8 can not be downloaded with notice: "Starting with Code Composer Ctudio v4, Blackhawk support (device drivers and updates) has been include with the TI distribution media and download".

    So, Are there another ways to get driver for this.

    Thanks,
    Viet Bui
  • Guru 124360 points

    In reply to Viet Bui:

    Viet,

    The drivers are installed as part of Code Composer Studio (CCS). However if you want them separately from CCS you can download the older ones from the Blackhawk website or contact them if you want the newer ones.

    Why is it that you want the drivers separately from CCS?

    Regards,
    John

     


    If my reply answers your question please click the "This resolved my issue" button

  • In reply to JohnS:

    Hi John,

    If the drivers are installed as part of CCS, I think its OK for me. Thanks for your advice.

    Viet Bui, 

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.