CCS/TMS320VC5416: How create project in CSS 5 for TMS320VC5416 for HPI Boot

sridevi m

Prodigy 170 points

Part Number: TMS320VC5416
Other Parts Discussed in Thread: TMS320C5517

Tool/software: Code Composer Studio

I am using TMS320VC5416

I have to boot it from HPI. Please guide me with the steps. I am new to DSP.

over 5 years ago

0 Yordan Kovachev over 5 years ago

TI__Guru**** 161600 points

Hi,

I've notified the C5xx team. They will post their feedback directly here.

Best Regards,
Yordan

0 Cvetolin Shulev-XID over 5 years ago in reply to Yordan Kovachev

TI__Guru 65405 points

Hi Sridevi,

Here are some tutorials about how to create a CCS v5 new project. I suggest you to pay attention on the proper target selection:
processors.wiki.ti.com/.../Projects_and_Build_Handbook_for_CCS
processors.wiki.ti.com/.../GSG:Creating_projects_v5
austinblackstoneengineering.com/.../

BR
Tsvetolin Shulev

0 Cvetolin Shulev-XID over 5 years ago in reply to Cvetolin Shulev-XID

TI__Guru 65405 points

Sridevi,

I found a document describing HPI Boot mode:
www.ti.com/.../spru173.pdf
Take a look at Fig 8-1 and section 8.2 where is described HPI Boot mode sequence.
I would like in addition that TMS320VC5416 is very old and if you are starting a new development I suggest you to choose TMS320C5517 which has SIMILAR FUNCTIONALITY but is not functionally equivalent to the compared device.

BR
Tsvetolin Shulev

Processors

Processors forum

CCS/TMS320VC5416: How create project in CSS 5 for TMS320VC5416 for HPI Boot