DM3730: WL18xx_to_DM3xx_porting_guide

Vojislav Leontic

Prodigy 180 points

Part Number: DM3730

Hello.

I need to port WL18XX to dm3730 2.6.37 kernel but I can't find this document:

WL18xx_to_DM3xx_porting_guide

How to get this doc?

Thanks

over 3 years ago

0 Nick Saulnier over 3 years ago

TI__Guru 72835 points

Hello Vojislav,

The html code for that page is attached. We are providing the wiki page as-is: there may be broken links, etc. The gforge link went down years ago, and I am not aware of a replacement link.

WL18xx to DM3xx porting guide - Texas Instruments Wiki_files.zip

Do keep in mind that DM3730 has limited design support as per the product page. We will not be able to provide any support for software development on DM3730.

Regards,

Nick

0 Vojislav Leontic over 3 years ago in reply to Nick Saulnier

Prodigy 180 points

Hello Nick.

Thanks for update.

You are correct, gforge link is down and file needed is ti_tools-wilink8-overlay-ipnc-v1-0.tar.gz or ti_tools-wifi-overlay.tar.gz?

Could you provide that file?

Regards,

Vojislav

0 Nick Saulnier over 3 years ago in reply to Vojislav Leontic

TI__Guru 72835 points

Hello Vojislav,

That file may just be gone if you don't see it with google searches. I will reassign your thread to the wilink team just in case they still have the code sitting around somewhere.

Regards,

Nick

0 S over 3 years ago in reply to Nick Saulnier

TI__Mastermind 35795 points

Hi,

We will check this at our end and will get back to you.

Regards

Saurabh

0 Vojislav Leontic over 2 years ago in reply to S

Prodigy 180 points

Hi.

Any update on this?

Regards

0 S over 2 years ago in reply to Vojislav Leontic

TI__Mastermind 35795 points

Hi Vojislav

The server which hosted this patch file was de-commissioned few years ago. At this time we are not able to access it.

Regards

Saurabh

Processors

Processors forum

DM3730: WL18xx_to_DM3xx_porting_guide