Hi,
I am studying how to use the mmWave Studio to achieve TDM-MIMO. During this period，I am confused about the use of "Start chirp TX" and "End chirp TX" in sensor config.
Can anyone give me some clear answer?
I will be very grateful if you can give me some example to introduce them!
Regards,
Li
Hi,
First, I think it will be helpful to review some older threads related to this topic.
Please use google site search as follows from a Chrome browser:
site e2e.ti.com mmwave studio tdma
Here are some threads I have found
https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1050036/iwr6843isk-ods-mmwave-studio-tdm-mimo-configuration-for-iwr6843
Regarding, Start Chirp, and End Chirp, please see following snapshot of the chirp memory
The transmitted chirps in a frame are created by looping "no of chirp loops" times from "Start Chirp Tx" to "End Chirp Tx"
Here is another document that is useful to understand the chirp configuration:
https://www.ti.com/lit/an/swra553a/swra553a.pdf
Also, regarding programming mmWave Studio, it will be easier to create a LUA script to program it.There are many examples provided in the mmWave studio
Thank you
Cesar
