This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
IWR6843AOPEVM
HI,
I am currently trying to connect IWR6843AOPEVM to the mmWaveDemo Visualzer.
And Port connecting problem was occured at work.
The problem is that port 2 is still not connected.
I searched a lot of solution article on the old forum.
But, I am still having a problem as below.
help, please.
Hi,
Have you followed the instructions for the out-of-box demo found on dev.ti.com?
https://dev.ti.com/tirex/explore/node?node=ALrLWv8piSenPXIAWScBow__VLyFKFf__LATEST
If so, please confirm that the board is flashed correctly with uniflash, set up for functional mode, that the computer is looking at the correct ports and that the board is reset. I also find that I have to connect/disconnect once or twice to get it working sometimes.
Best,
Nate