AWR6843: What interface do IWR6843LEVM and DCA1000 need?

Junehee Park

Prodigy 230 points

Part Number: AWR6843
Other Parts Discussed in Thread: DCA1000EVM, IWR6843LEVM, IWR6843

Hello~

I want to check 1D FFT and 2D FFT using mmWave Studio and DCA1000EVM.

In my opinion, I marked the interface required when connecting IWR6843LEVM to DCA1000EVM in green.

Please check if it's correct.

over 1 year ago

0 Josh Dye over 1 year ago

TI__Genius 15221 points

Hello,

We are looking into your question. Please expect a response within 48 hours.

Best Regards,

Josh

+1 Ankit Mohanty over 1 year ago in reply to Josh Dye

TI__Expert 6600 points

Hi Junehee,

The marked section is correct interface for connecting IWR6843 to DCA1000. You can refer to Section 5.13 of the file attached below for connection diagram & Switch settings for DCA1000 EVM mode. Or Section 5.15 if you are using an ICBOOST as well. Please set the switches in IWR6843 to SOP[1:6] = (01100-)

IWR6843LEVM User's Guide (ti.com)

Regards

Ankit

Sensors

Sensors forum

AWR6843: What interface do IWR6843LEVM and DCA1000 need?