LDC1101: Effects of magnets and solenoids

Masakazu Adachi

Part Number: LDC1101

Hello team,

I received a question from the customer.

The customer wants to use the LDC1101 in an environment where magnets or solenoids are nearby. In such a case, I think it is necessary to shield the area around the sensor coil to exclude the influence of magnetic force. Do you have any application notes regarding the above?

Regards,

Masa

over 1 year ago

0 John Miller - Sensing over 1 year ago

TI__Mastermind 34125 points

Masakazu,

No shielding from the magnets will be needed if they are stationary and a fixed value.
The solenoids may cause some random noise and interference, so some shielding from those may be needed.

For guidance on shielding for inductive sensing, please see the app note EMI Considerations for Inductive Sensing.

For more information about inductive sensing, please see our E2E Inductive sensing FAQ page.

Regards,
John

0 Masakazu Adachi over 1 year ago in reply to John Miller - Sensing

TI__Intellectual 2500 points

Hello John,

Thank you for your explanation.

Regards,

Masa

Sensors

Sensors forum

LDC1101: Effects of magnets and solenoids