AWR2243: Is it possible To change two parameters at the same time in Advance Chirp

yasuhiro.ide

Prodigy 20 points

Part Number: AWR2243

Hi,All.

Is it possible to change StartFreq and Idle Time at the same time in Advance_chirp?

for Example,

1st chirp : StaretFreq is 76GHz, IDle Time is 10us

2nd chirp : StaretFreq is 76GHz+10MHz, IDle Time is 10us+0.2us

3rd chirp : StaretFreq is 76GHz+20MHz, IDle Time is 10us+0.4us

512th chirp : 2nd chirp : StaretFreq is 76GHz+10MHz*511, IDle Time is 10us+0.2us*511

Thanks.

over 1 year ago

0 Pradipta Bandyopadhyay over 1 year ago

TI__Mastermind 24875 points

Hi,

Yes, this scheme is possible, and the implementation details are explained in the DFP user guide which comes as a part of the MCU plus SDK. Kindly go through the user guide to get all the details regarding the advance chirp feature.

Thanks,

Pradipta.

Sensors

Sensors forum

AWR2243: Is it possible To change two parameters at the same time in Advance Chirp