• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 106 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMAG5170D-Q1: TMAG5170D-Q1 max angle error X-Y axes

Mateusz Dudek
Prodigy 20 points
Part Number: TMAG5170D-Q1

What is the maximum angle error X-Y axes In temperature range -40 : 85degC? In datasheet it is only typical value

  • 0
    TI__Expert 6890 points

    Hi Mateusz,

    Thanks for posting to the Sensors forum.

    Total angle error is system and test-condition dependent. These typical values are at 25°C with specific RANGE (10) and CONV_AVG (101b) settings.

    As noted in the datasheet in section 9.1.5 Error Calculation During Angular Measurement, relevant error sources during angular measurement include sensitivity error, offset, noise, axis-axis mismatch, nonlinearity, drift across temperature, drift across lifetime, and so forth. The Angle Error Calculation Tool is provided to estimate total error during angle measurement.

    Best regards,

    Jesse