• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 261 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DCA1000EVM: Parsing logic for IQ data from DCA1000EVM using CLI tools

DCA1000EVM: IQ data capture using DCA1000EVM and IWR1642BOOST stops after couple of minutes

Gayatri Menon
Intellectual 705 points
Part Number: DCA1000EVM
Other Parts Discussed in Thread: IWR1642BOOST

Hi, 

I am trying to capture IQ data using DCA1000EVM and IWR1642BOOST. For this, I used OOB Demo and CLI tools provided. Sometimes I notice after around 1.5 -2mts  UDP transmission stops ( the first LED on the corner of the DCA  board stops blinking, its always high. Also no data is received on the host.)

My FrameRate is 1hz and Packet Delay is 100 us.  I am not able to figure out what's the issue here. Please help.

Thanks 

Gayatri