AWR1843AOPEVM: EVAL board 3D model

Dear Shoko- 

Thanks for the post and welcome to E2E. 

The design files are available online here: https://www.ti.com/lit/zip/sprr449 

Altium does have a 3D view

However, in case it is easier for you, I opened up the design in 2D and Board Planning mode and pulled out 2D with dimensions, so you can make your fixture directly. 

(click on images to enlarge)

Hello Josh, 

Thanks for your reply. But I cannot use Altium Designer :( 

Please convert the appropriate files to the either following filename extension; 

.dxf, .step, .x_t, .x_b, .iges, .igs, .sat, .prt, .sldprt

Please advise. 

Best regards, 

Shoko