• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 87 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRV5032: Vdss of the open drain output

Brian Wang0928
Genius 12280 points
Part Number: DRV5032

Customer would like to know that what max. voltage derating Vdss of the open-drain output? Could you help to answer! Thanks. 

Regards

Brian

  • 0
    TI__Genius 16320 points

    Brian,

    Thank you for reaching out on E2E.  The absolute maximum rating for this device is shown here:

    Vcc is rated to 5.5V, and the output voltage is rated to VCC+0.3V.  So under no case should the pull-up voltage exceed 5.8V.  However, we never recommend using a different voltage for the pull-up than VCC.  It is best to connect the pull-up resistor directly to VCC at the device to ensure that the Output voltage rating is never at risk of being violated.

    Thanks,

    Scott