Other Parts Discussed in Thread: PGA450Q1EVM
OTP programming PGA450 in socket EVM GUI is a slow way. Programming process will take 1 minutes . like below
1.Setting chip PGA450 in socket
2.Power up and MicroReset on the ESFR tab , watch the TEMP_SENS have value.
3.On Eeprom tab , Program EEPROM.
4.On OTP tab ,Select Device: Program OTP in Soocketed(second) device, Press Button "Load hex file into GUI
5.Wait a long time for program and check (I want ignore Verify OTP in GUI ,but I can't becauce have the wrong Verify chips maybe )
Can the GUI open source or bulid a one setp programming?
thanks