IWR1642: IWR1642 pplcount gui for 50m config ... MMWave detect 2 people, when 2 people walk side by side, only can detect 1 people on GUI isn't meet our expectation

Melvin Tsai

Intellectual 600 points

Part Number: IWR1642

Hi,

Problem:

MMWave detect 2 people, when 2 people walk side by side, only can detect 1 people on GUI.

expect result:6320.50m_longRange.cfg

MMWave detect 2 people, when 2 people walk side by side, only can detect 2 people on GUI.

HW:IWR1642 ES 2.0
attach file is config.

over 7 years ago

0 Justin Curewitz over 7 years ago

TI__Mastermind 28055 points

Hi Melvin,

This is another issue related to point cloud detection. Please download the latest industrial toolbox, as it should improve the performance in this situation.
The tracker will struggle to separate 2 people walking closely together, as it can be hard to tell apart their point clouds if they have the same distance, velocity, and angle.

Regards,
Justin

0 Melvin Tsai over 7 years ago in reply to Justin Curewitz

Intellectual 600 points

Hi,

HW ES2.0 , use industrial toolbox 2.5.1..

MMWave detect 2 people, when 2 people walk side by side ,only can detect 1 people.

/Melvin

0 Justin Curewitz over 7 years ago in reply to Melvin Tsai

TI__Mastermind 28055 points

Hi Melvin,

The process outlined in this post should allow you to solve this issue. Please reply in the linked thread, as I will be closing this one.

Regards,

Justin

Sensors

Sensors forum

IWR1642: IWR1642 pplcount gui for 50m config ... MMWave detect 2 people, when 2 people walk side by side, only can detect 1 people on GUI isn't meet our expectation