LM95071: About Charged-device model (CDM) spec

Tsukui Yusuke

Guru 21930 points

Part Number: LM95071

Hi,

Could you tell me about CDM spec?
The following contents are described in the data sheet.
This should be ±250V not ±200V, shouldn't it?

Best Regards,
Yusuke

over 5 years ago

0 Amit Ashara over 5 years ago

TI__Guru**** 244380 points

Hello Yusuke,

The CDM specification in the datasheet is correct, but I can double check the same.

0 Tsukui Yusuke over 5 years ago in reply to Amit Ashara

Guru 21930 points

Amit-san,

Thank you for your kind support.
Customers think CDM=200 V is too low. Does this device achieve CDM=250V?
We look forward to hearing from your double check result.

Best Regards,
Yusuke

0 Amit Ashara over 5 years ago in reply to Tsukui Yusuke

TI__Guru**** 244380 points

Hello Tsukui

I checked the device specification and it achieves CDM=250V. We would need to update the datasheet for the same and it will take some time for us to make sure that the datasheet reflects the updated value.

0 Tsukui Yusuke over 5 years ago in reply to Amit Ashara

Guru 21930 points

Amit-san,

I appreciate your kind response.

〉We would need to update the datasheet for the same and it will take some time for us to make sure that the datasheet reflects the updated value.
→Could you get a detailed schedule, please?

Best Regards,
Yusuke

0 Amit Ashara over 5 years ago in reply to Tsukui Yusuke

TI__Guru**** 244380 points

Hello Yusuke,

Tentative schedule would be sometime in April of this year for an updated datasheet.

Sensors

Sensors forum

LM95071: About Charged-device model (CDM) spec