• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 219 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AWR1243BOOST: There has seemed to some problems with my device AWR1243BOOST

AWR1243BOOST: There has seemed to some problems with my device AWR1243BOOST+mmwave-devpack+tsw1400

user6389450
Prodigy 120 points
Part Number: AWR1243BOOST

As the post https://e2e.ti.com/support/sensors/f/1023/t/931507  and https://e2e.ti.com/support/sensors/f/1023/t/937151 show , my device AWR1243BOOST has some problems. There have seen some  peak artifacts caused by the power supply. The power supply we used are 220V Alternating Current with 5V 4A and 5V 3A Power adapters. The peak artifacts have bad effects on my measurement. How should i do ?

  • 0
    TI__Mastermind 31680 points

    Hello User,

    I see this is a follow up thread of your previous threads discussing the same issue. And as Adrian pointed out in the below thread, it would be good if you could send us your sensor Configuration and we can try to replicate this issue. 

     

    Also, lets continue to use a single thread for our communication on this. I will close this thread and you can reply to Adrian's reply (dated 9th Nov 2020) on your previous post.

    Regards,

    Ishita