• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 164 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TS5A22364-Q1: TS5A22364-Q1 Negative Signaling Capability

TS5A22364: Which technique are used at "Negative Signaling Capability"?

Ernest Cho
Intellectual 2971 points
Part Number: TS5A22364
Other Parts Discussed in Thread: TS5A22362

Hello team,

My customer would like to use TS5A22364 or TS5A22362 so they would like to know how "Negative Signaling Capability" features can be used with 2.3~5.5VCC and GND?

Please let me know.

Best Regards,

Ernest Cho

  • 0
    TI__Prodigy 420 points

    Hi Ernest,

    The Negative Signaling Capability allows for negative signals below GND to pass through w/o distortion using only a single supply voltage. Specifically, it allows for signals as low as VCC - 5.5V to pass through, so the passable negative signal range would depend on what VCC your customer is using. Here is a table showing the maximum & minimum signal ranges for different VCCs. 

    Something to keep in mind as well is that the Negative Signaling Capability does not permit signals below GND in the OFF state (when the device is powered off).

    Regards, 

    Santiago