• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 16 subscribers
  • Views 115 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74CB3Q3251: Rail to Rail operation (true zero)

Tico ti
Prodigy 120 points
Part Number: SN74CB3Q3251

Hi to everyone! my design is an analog input stage, with single supply circuitry and true zero capability on the op-amp (thx, TI Slight smile for your application notes). My question is if the use of SN74CB3Q3251 would disturb the true zero capability. This device is marked as 'Support Input voltage beyond the supply'. Does it apply also to the GND supply rail? (I don't mean negative voltages, of course)

  • +1
    Guru 270600 points

    Voltages below GND are outside the recommended operating conditions, so there is no guarantee. But as long as the clamping diodes do not yet turn on (at about −0.5 V), I would not expect anything bad to happen.