• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 229 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Compiler/AWR1642: Error connecting to the target

Xiaoyu Yu
Prodigy 40 points
Part Number: AWR1642

Tool/software: TI C/C++ Compiler

Hi，

This problem occurs when connecting to a DSP。

Error connecting to the target:
(Error -1180 @ 0x0)
Device is held in reset. Take the device out of reset, and retry the operation.
(Emulation package 7.0.48.0)

Thanks！

  • 0
    TI__Guru 68170 points
    Hi,
    Have you flashed any application image to the device? Flash ccsdebug.bin or mmw demo application to it, only then you can connect to DSS and MSS core.
    DSS core is not powered up by default in the device, MSS application needs to un-halt DSS (DSP) core.

    For this purpose, I would recommend you to follow the instructions (CCS development mode) given mmwave SDK user guide.


    Regards,
    Jitendra