Problem of MSP-FET430UIF connecting with target.

DHarmpal Singh

Other Parts Discussed in Thread: MSP430FE427

Hi,

I am using the MSP430FE427 micro controller and MSP-FET430UIF for debuging, when i am tring to connect the targe it will be giving the following error.

Exception occurred during launch.

Reason: Failed to initialize the debug server.

Reason: Error initializing the emulator, tried to initalizw USB FET number1, but only found 0 USB FET's

Thanks

Dharmpal

over 13 years ago

0 Lisa TI over 13 years ago

TI__Guru*** 130875 points

Hi Dharmpal,

Could you please provide further information?

- is you FET driver properly installed? Ie no warnings or issues in the device manager ..

- what debug and target settings are you using?

Best Regards,

Lisa

0 DHarmpal Singh over 13 years ago in reply to Lisa TI

Prodigy 20 points

Hi Lisa,

this was due to IAR compiler was installed no my PC.

after removing the IAR this problem get solved.

Thanks

Dharmpal

0 Lisa TI over 13 years ago in reply to DHarmpal Singh

TI__Guru*** 130875 points

Hi Dharmpal,

Glad to hear you got it working, If both IAR and CCS are installed and using different dll versions, this typically causes such an issue.

Regards,

Lisa

Code Composer Studio™︎

Code Composer Studio forum

Problem of MSP-FET430UIF connecting with target.