CCS 5.2 crash after start debug

Stephan Joseph

Prodigy 40 points

Other Parts Discussed in Thread: CCSTUDIO

Hi,

my CCS 5.2 crash after connecting the Spectrum Digital XDS510USB when i start the debug session.

Please can you check the attached log files.

1805.attachement.zip

over 13 years ago

0 Lisa TI over 13 years ago

TI__Guru*** 130875 points

Hi Stephan,

ok, let us have a look at the logs. Do you only see this with the XDS510? Only with one workspace or project?

Best Regards,

Lisa

0 Stephan Joseph over 13 years ago in reply to Lisa TI

Prodigy 40 points

Hi Lisa,

we have only the XDS510USB.

On the same PC when i use CCSV3 there is no problem. There is also no problem with sdflash or sdconfig.

I have CCS 5.2 also installed on a Laptop for test and it is works good.

Best regards,

Stephan

0 Darian Sale over 13 years ago in reply to Stephan Joseph

TI__Expert 5945 points

Stephan,

Some dlls are being picked up from your 3.3 install. Can you check if your PATH environment variable contains any references to C:\CCSTudio_v3.3 and if so remove them? 3.3 should run fine without the PATH entries too - I don't know why they're even set in the first place.

Darian

0 Stephan Joseph over 13 years ago in reply to Darian Sale

Prodigy 40 points

Hi Darin,

thanks for fast and good help.

This was the reason.

Now the debug session starts correct.

Best regards

Stephan

Code Composer Studio™︎

Code Composer Studio forum

CCS 5.2 crash after start debug