• Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 756 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Digital Signal Processing and Applications with the OMAP-L138 eXperimenter: evm6747.xml file not found

Raul Balderas
Prodigy 10 points
Other Parts Discussed in Thread: OMAP-L138

Dear Sirs,

We are using CCS (ver. 4) to run some examples of the book "Digital Signal Processing and Applications with the OMAP-L138 eXperimenter"; however, when trying to compile them, the following error appears:

C:\Program Files\Texas Instruments\ccv4\common\targetdb\boards\evm6747.xml  fiel not found.

We are using the c6748.gel and L138_eXperimenter.ccxml files.

I would much appreciate if you could help me.

Thanks 

Raul

  • TI__Guru**** 450031 points
    Hello Raul,
    It sounds like you do not have the required device support installed with your v4 installation. You can try reinstalling an make sure you select the correct options needed for OMAP-L1x

    Also note that CCSv4 is a very old version that is no longer supported. I would encourage updating your CCS version to something recent. CCSv6 still supports OMAP-L13x.

    Thanks
    ki