• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Subscribers 54 subscribers
  • Views 892 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS: Error reading repository when checking for updates in CCS 9.3

Christopher Hall
Mastermind 44760 points

Tool/software: Code Composer Studio

Hi CCS team,

After downloading and installing CCS v9.3.0.00012 from the web, I tried checking for updates and was presented with the following error message:

Upon opening the referenced XML file I found that it was indeed invalid. I attempted to fix the issue but it appears this XML file is auto-generated and cannot be manually fixed. This appears to be a CCS bug.

Attached is my installation log file and eclipse log file with additional details:

/cfs-file/__key/communityserver-discussions-components-files/81/ccs_5F00_install_5F00_9.3.0.00012.log

/cfs-file/__key/communityserver-discussions-components-files/81/4034_2E00_.log

  • 0
    TI__Guru**** 476411 points

    Hi Chris,

    Thanks for reporting this. Interestingly, I only see this when on the TI network. When I am off the TI network, I can't reproduce this. Still under investigation...

    Thanks

    ki

  • 0 in reply to Ki
    TI__Guru**** 476411 points

    Hi Chris,

    The root cause of this issue has been found and fixed.

    Thanks

    ki

  • 0 in reply to Ki
    Prodigy 30 points

    It is neither fixed nor resolved as of two minutes ago, hence this comment.

    A ">" is missing in the end of last line of that xml:

    <child location='downloads.ti.com/.../

  • 0 in reply to Maxim Mikhalsky
    TI__Guru**** 476411 points

    Maxim, it may be a caching issue on your PC.

    Could you try reloading your local cache (Window > Preferences > Install/Update >  Available Software Sites), Select the "Code Composer Studio v9 Updates" site (disable and then re-enable) and select Reload)?

  • 0 in reply to Ki
    Prodigy 30 points

    Did that, with no apparent effect:

    1. Did as you said, but the "Reload" button remained disabled (grey).

    2. On the latest attempt to update, CCS went through the list of sites, and reported that no new updates are available. Note that prior update attempts failed because of the ">" issue..

    3. Also, after prior attempts and before writing here, I added the missing ">" manually to the xml file, then attempted an update again. In anticipation that CCS would write over it, I set the file read-only attribute. CCS downloaded and wrote over it, hence it is unlikely to be a cache issue, though that remains inconclusive.

    Now I have manually erased all files in "C:\TI\CCS\ccs\eclipse\p2\org.eclipse.equinox.p2.repository\cache" folder. There is another cache folder, "C:\TI\CCS\ccs\eclipse\p2\org.eclipse.equinox.p2.core\cache\binary", but I did not erase anything there, as some of those files are much older, and some are a few days old. After that, CCS has downloaded lots of files into "C:\TI\CCS\ccs\eclipse\p2\org.eclipse.equinox.p2.repository\cache", and then reported that no new updates are available. It did not throw any error, but it did not request CCS restart either, though it did after prior updates.

    p.s. The "...7024.xml" file is now correct, with ">" in place where it was missing before.

  • 0 in reply to Maxim Mikhalsky
    TI__Guru**** 476411 points

    Maxim Mikhalsky said:
    CCS downloaded and wrote over it, hence it is unlikely to be a cache issue, though that remains inconclusive.

    What is the date of the file that was downloaded? It should be January 6.