How can I assign tolerances and distributions for circuit elements in Pspice for TI?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
How can I assign tolerances and distributions for circuit elements in Pspice for TI?
Hello Ajay,
I'm not sure if I entirely understand your question. You can change the simulation tolerances if you Create a Simulation Profile, or Edit Simulation Profile. They are in the Options section.
Thank you,
Jackie
He wants to do a Monte Carlo type simulation where you vary the component values and see the results.
Hi Ajay,
I noticed that you have opened a new thread regarding Monte Carlo simulation settings here: https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1049142/pspice-for-ti-doubt-in-the-circled-field
I will be closing this thread now.
Thank you,
Jackie