Hi Team,
Good day. I am posting this inquiry on behalf of the customer.
"I would like to ask you if you have the pick and place files for this inverter? In the files has a BOMs and gerber files, but hasnt a pick and place files."
Please help to advise. Thank you for extending your support.
Kind regards,
Marvin
Hi Brent,
Thank you for your response. The customer asked for the latest Gerber files, Boms, and pick and place files that are needed to make the inverter.
I directed him to download the design files on the product page.
https://www.ti.com/tool/PMP22650#design-products
Please see the feedback from the customer.
"Thank you for your fast response!
I just need some guidelines.
For the inverter I will need this file, right?
Or its PMP22670E2? But you sent me PMP22650E3_PnP.xls Considering the file name I need exactly the first or ? Just I need a little bit of help how to figure out which files are for the inverter and which are for the driver and etc.
I think that I need:
PMP22650E2_Gerbers.zip and PMP22650E2(001)_TI-BOM.PDF - for the inverter, correct me if I'm wrong.
PMP22712E2 Gerbers.zip and PMP22712E2(001)_TI-BOM.PDF, correct me if I'm wrong.
PMP22773E3 Gerbers.zip and PMP22773E3(001)_TI-BOM.PDF, correct me if I'm wrong.
Оne of the last two is for the controller F280039C which I will buy from you.
PS. I need also the other pick and place files, please. It's appreciated!"
Please help to advise. Thank you for extending your support.
Kind regards,
Marvin
