PMP41081: YXS61041T not available

Sandip Yenare

Prodigy 51 points

Part Number: PMP41081
Other Parts Discussed in Thread: TIDA-010062, PMP41006, PMP41037

Tool/software:

please share details of YXS61041T make YAXIN ELECTRONIC TECH. it is not available on interent.

2 months ago

0 Desheng, Guo 2 months ago

TI__Expert 6130 points

I used this one in the last version, please refer.

1000W Resonant Choke L=13uH Rev A -SPEC.pdf

0 Sandip Yenare 2 months ago in reply to Desheng, Guo

Prodigy 51 points

Hello Desheng,

This transformer is used in PMP4103 - 1kw 800 to 12V active half bridge topology. In BOM transformer part number is YXS61041T. Part suggested by you is inductor . Please share details of YXS61041T.

Regards,

Sandip

Sandip Yenare said:
PMP4103

0 Desheng, Guo 1 month ago in reply to Sandip Yenare

TI__Expert 6130 points

I thought you are asking the inductor. Here is the transformer,

0724.YXS61075T_1KW 12V LLC Tarnsformer.pdf

0 Sandip Yenare 1 month ago in reply to Desheng, Guo

Prodigy 51 points

This part number is different . Required part number is YXS61041T, but you shared details of YXS61075T.

Can we use YXS61041T transformer for phase shift full bridge topology?

0 Desheng, Guo 1 month ago in reply to Sandip Yenare

TI__Expert 6130 points

Hi Sandip,

I used YXS61075T in PMP41081, YXS61041T is used in TIDA-010062 and PMP41006.

YXS61041T is dedicated for LLC, it included SR FET and capacitors on the secondary PCB winding, you may need remove all the capacitors, if you want to use it in PSFB.