A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
webbench does not allow to force higher frequency on LM3481
webbench limits the freq based on duty cycle limits of the device. but the advertised low load feature (shutting down on a small output over voltage) cannot be exercised this way.
Sorry for the delay on this I must have missed it come through.
You are right, WEBENCH will not allow you to design using this device in Over Voltage Protection mode (OVP) at full load. If this is something that you really want to do we would recommend consulting the datasheet for design guidance.
