Hi
I simulated TPS62262-Q1 under Vin=2.7~3.9V, Vout=1.2V, Iout=350mA, Ta=100℃.
But I couldn't simulate it though I was able to do it in bygone days.
Could you tell me this reason?
Best regards,
Yokota
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
I simulated TPS62262-Q1 under Vin=2.7~3.9V, Vout=1.2V, Iout=350mA, Ta=100℃.
But I couldn't simulate it though I was able to do it in bygone days.
Could you tell me this reason?
Best regards,
Yokota
Nikhil-san
I'm sorry but I don't have the report of design that I could create earlier.
Best regards,
Yokota
Yokota-san,
If you click on the "My Designs/Project" button on the top left corner in the WEBENCH application, you can find your old design for this part. When you go to that design, click on "Print" on the top to generate the PDF report.
In parallel, we will continue to look at the issue, but it will be good to get your old design so that we can try to recreate it.
Thanks,
Nikhil-san
Thank you for the information.
I could simulate it by the method you taught me.
I attached my old design.
Best regards,
Yokota
Yokota-san,
The issue has been fixed now. You should be able to create a design now.
Thanks,