TINA/Spice/TINA-TI: How to create power component model in TINA

Hi Wei-Hao,

Not that I am aware of, but still looking just in case other team members do have it.

Herman

Hi Herman,

Really appreciate you reply, and if the material is not available. Can you show us the step by step how to do it?

Thanks a lot.

Best Regards,

Wei-Hao

Hi Wei-Hao,

Please go through the attached netlist to understand the modeling of multi winding transformer and do let us know if you have any queries.  Following are the description of the parameters associated with the model.

LEAK= Leakage inductance

RDCP=DCR of primary side inductance

LPRI= Primary side inductance

NSP1= Secondary1 to primary turns ratio

NSP2= Secondary2 to primary turns ratio

RDCS2=DCR of secondary1 side inductance

RDCS2=DCR of secondary2 side inductance

multi_winding_TX.lib

Thanks,

Somen

Hi Somen,

Thanks for your file and explanation. But in case if my customer need to make different number of windings, how should they do it?

How did you build the multi_winding_TX.lib model is exactly what my customer wanted to learn.

Thanks you.

Best Regards,
Wei-Hao

Hi Wei-Hao,

The implementation for the secondary side can be repeated just by changing the device name. For example, in the lib file attached above

line #7 to #12 is for one of the secondary winding and the same thing is repeated in line #13 to #18 to implement another secondary winding. Same can be done for multiple windings.

Thanks,

Somen

Hi Somen,

Thanks for the reply. I tried to compile the .lib file but showed error in TINA. And how to make create the component symbol/footprint with TINA?

Thank you.

Best Regards,
Wei-Hao