This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA/Spice/TPD1E05U06-Q1: TPD1E05U06-Q1 S-Parameter Model is Non-Causal

Part Number: TPD1E05U06-Q1
Other Parts Discussed in Thread: TINA-TI,

Tool/software: TINA-TI or Spice Models

TPD1E05U06-Q1 S-Parameter Model appears to be non-causal (identified by Hyperlynx 9.4.2).  This can lead to simulation issues.  Can the s-parameter file be updated to be causal?  The model I am using is available on Ti.com at the following location:

http://www.ti.com/lit/zip/slvmbu0

Thanks!