• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 296 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Problem Creating Macro Wizard

Stephen Power
Intellectual 405 points
Other Parts Discussed in Thread: TINA-TI

Hi

I want to use the Rohm BJT 2scr574d3 in TINA-TI. Rohm provide a spice model at https://www.rohm.com/products/transistors/bipolar-transistors/standard-bipolar-transistors/2scr574d3-product/tools . I downloaded the zip, unzipped the lib file and opened it in TINA-TI where I then compiled it successfully. But when I run the 'New Macro Wizard' and choose the .lib file I get a blank dialog box when I click 'Next'. No suggested shapes, no net-list recognized.

I have been able to create a macro for STD1802, which is also a .lib file but is created as a sub-circuit.

I tried copying the parameters from 2scr574d3 into the STD1802 file in  a text file. I was able to create a .TSM file but it didn't behave as expected in a simulation file I ran.

Any ideas what I am doing wrong?

regards

Steve