• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 250 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDA-01159: TIDA-00951

Mohammad Alsmadi
Intellectual 340 points
Part Number: TIDA-01159

Hello there, 

I am writing to inquire regarding the testing procedure of tida-01159. 

1-Is there any recommended values/specifications for the half bridge circuit? (MOSFETS, Inductor, and capacitors).

2-If the circuit to be tested only to check its basic functionality, can this be done without half bridge circuit? What can be tested without half bridge circuit?

Thank you in advance!

  • 0
    TI__Expert 6090 points

    Hi, Mohammad

    TIDA-01159 should be able to drive most discrete MOSFET.

    You could simulate the MOSFET gate with an equvilant capacitor.

    But be attention, you need tie the 'HVGND' with 'GD_HS' together with an jumper, when you testing the output of 'HV_SNODE'.