[Click here to return to the INT-TXP USB Homepage] Welcome to the eUSB2 E2E Page Listed below are a variety of resources to assist with the implementation of USB2.0 & eUSB2! eUSB2 Training: What is embedded USB2.0 (eUSB2)? eUSB2 Collateral…

Part Number: AM623 HI TI experts, Do you have some guidelines when designing customer board. The Custom board will have a SOM board and a Carrier Board

Part Number: DS100BR111 Other Parts Discussed in Thread: DS100BR210 The DS100BR111 and DS100BR210 devices share an IBIS-AMI model. It has been noted that there is a discrepancy between the CTLE boost values listed in the IBIS-AMI User's Guide and the…

Part Number: BQ25640EVM Other Parts Discussed in Thread: BQ25640 , BQSTUDIO , Please see attached for the BQ25640 BQZ file to be used with BQSTUDIO software. To use the GUI you will need to download Battery management studio software from TI.com,…

Part Number: TUSB2E221 Other Parts Discussed in Thread: TUSB2E22 The TUSB2E221 is TI's latest eUSB2 2-port repeater, and offers a variety of updates and improvements to confirm to the eUSB2 V1.2 spec. Some of the updates are as follows: 1.2V and…

Part Number: AM6442 Other Parts Discussed in Thread: TMDS64EVM , , AM5728 , AM67 , PROCESSOR-SDK-AM62X , SYSCONFIG Hi TI Experts, Is there a list of design recommendations or guidelines or E2E references that can be following while implementing GPMC…

Part Number: AM263P4-Q1 Other Parts Discussed in Thread: UNIFLASH , SYSCONFIG Hi TI Team, How can I protect blocks/sector against erases and writes.

Hi TI team, How to configure AM261 SoC to run at 200MHz CPU Clock Frequency?

Part Number: J721S2XSOMXEVM How can we update KEYREV using the TISCI_MSG_WRITE_KEYREV API on HS-SE device?

Part Number: J721S2XSOMXEVM eMMC has two boot partition 0 and 1 . Boot ROM selects the active partion based on PARTCONFIG register (EXCSD[179]) . How to switch between these in keywriter application?