LAUNCHXL-CC26X2R1: LAUNCHXL-CC26X2R1

Rabia DOGAN

Hello everyone,

I want to make only observer and only broadcaster for this project. And I don't want to use a two-button menu. My project should be always broadcaster and observer. Absolutely no connection mode. Please could you help me with this problem?

over 2 years ago

0 YiKai Chen over 2 years ago

Guru 735455 points

Try to refer to multi_role example and revise it to do advertising and scanning without button menu.

0 Rabia DOGAN over 2 years ago in reply to YiKai Chen

Prodigy 160 points

Hi,

yes, I managed to remove the two-button menu. I want to scan only same devices on my device. I know this configuration is made sys config file and I did. But I have a new problem. I observed that the scan devices are in the scanList array. There is only one device around my device. scan list is getting full and the scan stops. I don't know how to deal with this problem. Can you help me?

0 YiKai Chen over 2 years ago in reply to Rabia DOGAN

Guru 735455 points

Do you change DEFAULT_MAX_SCAN_RES define? The default value of DEFAULT_MAX_SCAN_RES is 8 and scan list shouldn't be full if there is only one in the list.

Bluetooth®︎

Bluetooth forum

LAUNCHXL-CC26X2R1: LAUNCHXL-CC26X2R1