• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 52 subscribers
  • Views 298 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2340R5: Is the PHY mode (2M and coded) supported?

Patrick Xu
Prodigy 120 points

Are the PHY modes 2M, S2 and S8 coded supported for the current CC2340 SDK?

I tried these modes, but didn't see the throughput was changed.

  • 0
    TI__Guru* 97640 points

    Hi,

    The 2M and Coded PHY (S2, S8) are still under development and characterization. They will be released at a later point (I cannot share timeline on a public forum, please reach out to your local support team if more details are required).

    Best regards,